Lumasense-technologies IGA 15 plus Bedienungsanleitung PDF herunterladen (Seite 9)

IMPAC pyrometer IGA 15 plus

5 Display functions / Setting keys

Additionally to the temperature measurement the IGA 15 plus provides some more functions which

are necessary for a correct measurement and usefully enlarging the functionality of the pyrometer.

Temperature display

Parameter / function

Laser targeting light function on / off

Indication °C or °F

Parameter value / function value

Setting keys:

1) Parameter selection PAR

2) change of parameter values:  

Indication °C or °F: indicates the temperature in °C or °F.

Temperature display: shows the actual or stored temperature value.

Parameter / function: selecting a parameter or a measuring function for indication or changing a

corresponding short form will be displayed.

Parameter value / function value: indicates the value of the adjusted parameters or the tempera-

ture of the selected measuring function.

PAR key: Repeated pushing of the PAR key displays all available parameters (as EMI, HI, INT,

C/F) or additional measuring functions in the following sequence mentioned below. Parameters

are part of the basic settings of the pyrometer. They are only displayed during adjustment. Meas-

uring functions are displayed additionally to the measuring temperature (MAX, MIN, AVG, DIF),

can give an acoustic signal (HI) or can be used for data analysis (RCL). Selected measuring

functions are stored when the pyrometer is switched off and will be activated by restarting the

instrument.

PAR

Display

Parameter /

function

Short explanation

Factory

settings

1 x EMI Emissivity indication and setting of emissivity 100

2 x MAX Max. value indication of maximum value -

3 x MIN Min. value indication of minimum value -

4 x AVG Average indication of average value -

5 x DIF Difference

indication of the difference between the actual meas-

uring temperature and the start measuring temperature

6 x HI Hi alarm indication and setting of acoustic alarm 1800°C

7 x CLR Clear deletes the stored measured values

8 x STO

Store fixing of storage position

9 x RCL

Recall indication of stored measured values

10 x INT Interval

indication and setting of time interval for storage of

measured values in continuous mode

OFF

11 x C / F

Celsius

Fahrenheit

indication and setting of temperature reading

in °C or °F

Arrow keys:

With the arrow keys ▲ and ▼ the corresponding settings for all parameters can be changed. A

change in setting of a parameter is stored automatically.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 31 32

Kommentare zu diesen Handbüchern

Keine Kommentare

Lumasense-technologies IGA 15 plus Bedienungsanleitung Seite 9

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Werkzeug Lumasense-technologies IGA 15 plus