Lumasense-technologies IGA 15 plus Bedienungsanleitung PDF herunterladen (Seite 13)

IMPAC pyrometer IGA 15 plus

8.2 Software PortaWin

PortaW

in is a Windows based software which enlarges the functions of the pyrometer, the min.

requirement is Windows XP. To install the software, double-click the setup.exe file on the installa-

tion CD.

Starting the program will show the following icons with the corresponding functions:

Transfers the stored measured values of the pyrometer to the PC. following

data will be added to each temperature value:

• date of measurement

• time of measurement

• adjusted emissivity

• minimum and maximum value of all measurements

Starts and stops the recording of temperature data and displays them in an

online diagram. The sequence of the recorded values is dependent on the

adjusted time interval.

Transferred stored data or online recorded data can be stored under a

certain file name and recalled at any time.

Recalled data can be displayed in a diagram or in table form and printed out

for further analysis.

The data files can be converted into text files (under output ASCII file save

as .txt file), and transferred into EXCEL.

Additionally to the measured values the date and time will be read out via

interface. Theses values can checked and adjusted on this position.

9 Special displays of the pyrometer

Display Description

Battery capacity low, only short operation time of the pyrometer,

automatically shut-down on too low capacity

7777 Measuring temperature below beginning of temperature range (250°C)

8888 Measuring temperature above end of temperature range (1800°C)

ERR2 Malfunction by strong HF-interferences

MAX 7777 Maximum value storage below beginning of temperature range (250°C)

MAX 8888 Maximum value storage above end of temperature range (1800°C)

MIN 7777 Minimum value storage below beginning of temperature range (250°C)

MIN 8888 Minimum value storage above end of temperature range (1800°C)

DIF 7777 Difference temp. measurement out of display range

DIF 8888 Difference temp. measurement out of display range

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 31 32

Keine Kommentare

Lumasense-technologies IGA 15 plus Bedienungsanleitung Seite 13