Lumasense-technologies InfraWin 5 Bedienungsanleitung PDF herunterladen (Seite 25)

InfraWin 5 Manual I/O Module  25

5 I/O Module

The I/O Module allows accessories to connect to the software and is used to trigger measurements

externally or to send a signal (like a relay) under certain conditions.

5.1 Searching for an I/O module

There are four ways to start the search for an I/O module:

1. Use Instrument Search in Devices/Parameters.

2. Manually (before the search function starts) by clicking

Options > I/O Module > Search I/O Module.

3. Automatically by clicking Options > I/O Module > Start search automatically by

connecting. Connect I/O Module.

4. By pressing the Search I/O module button in the left-hand main menu of the main screen.

5.2 Applying the I/O module

By using the I/O module, users can

access trigger input and alarm output

functions.

5.2.1 Trigger Function

(Input)

 State Controlled – As long as

the contact is closed, it will be

measured. If the contact is

opened, measurement will

pause.

 Edge Controlled – Triggering

by brief contact. Measurement

will continue independently of

the contact until measurement

is paused or stopped.

5.2.2 Alarm Output Function

Activating the I/O alarm output allows

users access to the following functions:

threshold, zone, and  T-time.

5.3 Removing the I/O module

Before you remove the I/O module from the computer, you should log out of the device by clicking

Remove I/O module.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 31 32

Keine Kommentare

Lumasense-technologies InfraWin 5 Bedienungsanleitung Seite 25